Analog Devices EZ-KIT Lite ADSP-BF707, System Manual

Page: 25 / 85

ADSP-BF707 EZ-KIT Lite Evaluation System Manual 1-7
Using ADSP-BF707 EZ-KIT Lite
5. Select Emulator and click Next .
The Select Platform page of the Session Wizard appears.
6. Choose the type of emulator that is connected to the EZ-KIT Lite.
7. Click Finish to close the wizard.
The new debug configuration is created and added to the Debug
Configurations list.
8. In the Name edit box, users can select an appropriate name to
describe the configuration, otherwise a default name is provided.
9. In the Program(s) to load section, choose the program to load (if
the appropriate program is not already populated) when connect-
ing to the board. If not loading any program upon connection to
the target, do not make any changes.

While connected to the target, there is no way to choose a program
to download. To load a program once connected, terminate the
session and then load the new program.

To delete a configuration, go to the Debug Configurations dialog
box and select the configuration to delete. Click and choose Yes
when asked if you wish to delete the selected launch configuration.
Then
Close the dialog box.

To disconnect from the target board, click the terminate button
or choose Run > Terminate .
To delete a session, choose Target > Session > Session List . Select
the session name from the list and click Delete . Click OK .

The default configurations that show up in the CCES Debug Con-
figurations wizard are for JTAG mode debugging only. To use
SWD mode, a new platform will need to be created using the Tar-
get Configurator.