EVAL-ADM1075MEBZ User Guide
UG-548
Rev. A | Page 9 of 16
TEST PLOTS
Figure 5. Power Up; Test Points Are as Follows: Channel 1 = V
IN
(Yellow),
Channel 2 = GATE (Pink), Channel 3 = V
DS
(Blue), Channel 4 =
System Current (Green), M1 = FET Power (CH2 × CH4) (Orange)
Figure 6. Power Up into 24 Ω Resistive Load; Test Points Are as Follows:
Channel 1 = V
IN
, Channel 2 = GATE, Channel 3 = V
DS
, Channel 4 = System Current
Figure 7. Power Up into a Fault Condition; Test Points Are as Follows:
Channel = V
IN
, Channel 2 = TIMER, Channel 3 = V
DS
, Channel 4 = System Current,
Math Channel = FET Power
Figure 8. Timer Cycle at Power-Up; Test Points Are as Follows: Channel 1 = V
IN
,
Channel 2 = TIMER, Channel 3 = V
DS
, Channel 4 = System Current
Figure 9. Short-Circuit Event; Test Points Are as Follows: Channel 1 = V
IN
,
Channel 2 = GATE, Channel 3 = V
DS
, Channel 4 = System Current,
Math Channel = FET Power
Figure 10. Short Circuit (Zoom); Test Points Are as Follows: Channel 1 = V
IN
,
Channel 2 = GATE, Channel 3 = V
DS
, Channel 4 = System Current
11
414
-005
11414
-006
11414-
007
1
1414-
008
11
414
-009
11414-
010
