User Guide
UG-1283
Rev. A | Page 17 of 24
T/R CONTROL TAB
The
T/R Control
tab controls the enabling of the transmit and
receive channels (see Figure 32).
If the
TX EN
check box (under
Switch Control
) is selected, the
transmit enable functions are enabled and the receive enable
functions are disabled.
If the
RX EN
check box (under
Switch Control
) is selected, the
receive enable functions are enabled and the transmit enable
functions are disabled.
When the check boxes are selected or cleared, click
Write Enable
Values
or
Write Switch Values
in each section to write the
register settings to the ADAR1000-EVALZ.
GPIO TAB
In the
GPIO
tab (see Figure 33), select the correct check boxes to
set the corresponding digital control signals on the ADAR1000-
EVALZ to Logic 1 (selected) or Logic 0 (cleared).
167
88-
010
Figure 32.
T/R Control
Tab
1
678
8-
0
1
1
Figure 33.
GPIO
Tab
