August 2012
L010199
22
Encoder Auto Correct
Set the encoder auto correct feature on or off.
Set Encoder Delay
Send the encoder delay parameter to the controller. (ms)
Set Motor Ratio
Send the encoder pulse to motor step ratio to the controller.
Set Encoder Retries
Send number of encoder auto correct retries to the controller. When the auto
correct errors, Output 8 will be triggered.
Set Encoder Window
Send the encoder window to the controller.
Encoder Reset
Reset the encoder count to 0 in the controller.
Output on the Fly
Set the output on the fly feature on or off.
Set 1
st
Output Position
Send the 1
st
position to set the output to the controller.
Set # of Steps Between
Outputs
Send # of steps to take between activated outputs to the controller.
Set # of Output Counts
Send # of output counts to the controller.
Move # of Steps
Motor will move number of steps entered.
Reset Position to 0
Reset the controller position to 0 (zero).
Stop Hard
Stop any motor motion immediately.
Index on the Fly
Set the index on the fly feature on or off.
Set Registration Index
Send registration index to controller.
Slew
Motor will ramp up to maximum speed and keep moving until the index on the
fly input activated or a stop motion is triggered.
Stop Hard
Stop any motor motion immediately.
Verify Parameters
Updates and displays controllers parameters for this tab sheet.
Tab Sheets - Encoder Options and Registration Inputs
July 2018
