anago KST Series Operating Manual Download Page 7 | Manualshive

Page: 7 / 31

anago KST Series Operating Manual Download Page 7

6

©2003-2021 Anago Ltd

Safety

IMPORTANT

It is

highly recommended

that the operator

wears appropriate cut-resistant or chain mail gloves

when loading and unloading blades into the Anago KST.

Keep the guard screen installed securely during use.

At all times, ensure care is taken

when handling blades.

2.

INITIAL SETUP

Software Installation



Ensure you are logged on with a username that has administrator privileges. This must be
done before new programs can be installed



Plug the provided Anago USB flash drive into a USB port on the PC / Laptop



The setup program should run automatically. If it doesn’t, navigate to the Anago KST
Setup.exe file. Right-click and choose “Run as administrator”



Follow all prompts from the installation guide



After Installation, select the program from the Start Menu: AnagoSharp



You will be prompted to install a license – this is the license.xml file on the supplied USB. If
you already own a KST, fill out the information to receive a license

«
...
5
6
7
8
9
...
»

Summary of Contents for KST Series
































Reviews:

No comments