anago KST Series, Operating Manual, Page: 12 / 31

11
©2003-2021 Anago Ltd

Using an object, carefully move the test media to the side of the blade (refer to the picture for
an example)
 Close the right guard again

With the screen displaying, ‘ Set Bot Limit 1 ’ reposition the blade clamp using the Up
/ Down buttons until it is in the required end position

Press the Run button to save the current bottom limit position
 Press the Retract button to return to the main setup menu

Press the Down button on the keypad until the LCD screen displays ‘ Top Limits ’ the
top limit sub-menu

Press the Run button to select ‘Ok’ and enter into the top limit sub-menu

With the screen displaying, ‘ Select Top Limit ’ press the Up / Down
button to cycle through to the appropriate bottom limit to be set

Press the Run button to select ‘Ok’ and enter into the required top limit’s settings

With the screen displaying, ‘ Set Top Limit 1 ’ reposition the blade clamp using the Up
/ Down buttons until it is in the required start position

Press the Run button to save the current top limit position

Press the Retract button to return to the main setup menu
Note: as a minimum, Bottom Limit 1 and Top Limit 1 should be set.