20
Error code
displayed
on
joystick
with color
screen
Error code on joystick
with LED display
(indicator lights)
Number of
flashes of
indicator
light on e-bx
Reason
Problem solving tips
8.
If the reading is lower than 3.5 kOhms, disconnect the actuator
from its extension cable and take another reading. The reading
should show the infinity sign (OL). If the reading is lower than
infinity (OL), replace the extension cable.
9.
If the resistance reading is infinity (OL) on the extension cable
only and the value is lower than 3.5 kOhms, replace the actuator.
10.
If a multimeter is not available and nothing is inconsistent or
damaged, reconnect each actuator extension cables, one by one,
to the e-bx until an error pops up and verify which cable or which
actuator caused the error. Turn off chair, replace extension cable
and reconnect actuator causing error. Turn chair back on.
11.
If error reoccurs, replace the actuator.
12.
If after executing all these steps, the source of the error is still not
found, replace the e-bx.
9645
2
Problem with the
output unit of the e-bx
1.
Reset alarm by turning chair off and back on, making sure the
error does not reoccur.
2.
Make all actuators move in each direction. If error reoccurs,
replace actuator and its extension cable responsible for
generating the error and then replace the e-bx.
