42
Specifications
VTX Video Teleconferencing System - Preliminary
VTX Specifications
Power Supply
100-250 VAC, 50 - 6- Hz
Connectors
Three 8-pin modular RJ45 connectors for ISDN
One RS-232 (female DB-9F) for data
Three four-pin captive-wire connectors for AXlink
Four RCA connectors for TiltCam, plus a fifth four-pin
Captive-wire connector for the TiltCam
One RCA connector for an optional external video camera
One S-Video connector for an optional external S-Video
source
One XLR DBF connector for an optional external
microphone
Two RCA connectors for external video and audio inputs
One S-Video connector for external S-Video input
Two ¼” phone connectors for an external echo canceller
One RCA connector and one connector for connecting to a
VCR for recording
Two RCA connectors for connecting to a monitor or
external display
One RCA connector for video
Dimensions (HWD)
1.73” (4.4 cm) x 20.5” (52.07 cm) x 9.25” (23.5 cm)
7.375” (18.73 cm) X 20.5” ( 52.07 cm) X 16.0” (40.64 cm)
Weight
33 lb (12.31 kg)
Environmental
Operating Temperature
32°F to 104°F (0°C to 40°C)
Humidity
10% to 90% (relative humidity)
Storage and transport
-4°F to 140°F (-20°C to 60°C) at RH 10 - 90% (non-
condensing)
PS4.2
DC Power Output
12 VDC at 4.2 A
Switching regulated, overload protected
AC Power Input
110/220 VAC auto-switched operation; UL, CSA, and TUV
listed
Dimensions (HWD)
7.375” X 20.5” X 16”
Summary of Contents for VTX
Page 1: ...t a k e c o n t r o l VTX Video Teleconferencing System Instruction Manual PRELIMINARY ...
Page 10: ...6 Introduction VTX Video Teleconferencing System Preliminary ...
Page 14: ...10 Pre Installation VTX Video Teleconferencing System Preliminary ...
Page 54: ...50 Technical Support VTX Video Teleconferencing System Preliminary ...