2.3 Rack Installation
Once the Remote Panel is wired, place it into the rack.
To install the Precis Remote in a rack
:
1. Insert the wired panel through the rear of the rack.
2. Align the Precis Remote with the rack screw holes and fasten firmly
with the mounting screws.
Make sure the Precis Remote is working properly by executing a test
switch (see
Executing and Disconnecting Switches
on page 3-2).
If the panel is not working properly, check all system connections and
retry the test switch before contacting AutoAssist (see
Technical Support
on page 1-4).
2.4 Linking Multiple Panels
Precis Remote Panels can be linked together to control large systems.
See the X
N
Connect Help file for information on remapping keys and
adding control panels to an existing system's configuration.
To link Precis Remote Panels to each other,
connect the panels in a
daisy chain using X
N
Net link cables. The connection can be made from
either Comm Link on a panel to either Comm Link on the next panel
(see Figure 8 on page 2-5).
2-4
Precis Remote X/Y Control Panel
Installing the Precis Remote Panel
Figure 7: Place in rack and fasten with mounting screws
Installing
Summary of Contents for Precis
Page 1: ......
