AMX NXA-PDU-1508-08, Operation/Reference Manual

Page: 9 / 20

Installation
5 NXA-PDU-1508-8 Power Distribution Unit (240V / 10A)
Installation
Front Panel Components
The front panel components of the NXA-PDU-1508-8 are shown in FIG. 4:
RESET Pushbutton
The RESET pushbutton is a momentary breaker reset switch for the MASTER AxLink power connection.
Press the RESET button to reset the PDU in the event that the PDU’s circuit breaker is tripped (due to
overcurrent protection).
Trippage of the RESET pushbutton causes a 0.5 second toggle on the AxLink power line.
Rear Panel Components
The rear panel components of the NXA-PDU-1508-8 are described below (FIG. 5):
FIG. 4 NXA-PDU-1508-8 - Front Panel Components
RESET pushbutton
AxLink STATUS LED
AxLink BANK 1
POWER (Output 1-8 Status) LEDs
Status LED
AxLink BANK 2
Status LED
See the Specifications table for descriptions of the LEDs on the front panel.
FIG. 5 NXA-PDU-1508-8 - Rear Panel Components
Power Inlet
Fuse Compartment
AXLINK POWER Connectors BANK 1 (1-4)
MASTER AxLink Connector (to NetLinx Master Controller)
TEMP (RTS) Input Connector
Power Outlets 1-8
AXLINK POWER Connectors BANK 2 (5-8)
CONFIG DIP Switch
8 7 6 5 4 3 2 1