![background image](http://html1.mh-extra.com/html/amx/mxd-701/mxd-701_operation-reference-manual_2939303033.webp)
Upgrading Firmware
29
MXD/T-701 7" Modero X Series® G5 Touch Panels
In this case, there are two options for proceeding with the firmware transfer:
Select
Transfer the KIT File via the NetLinx Master Controller (legacy KIT file transfer method)...
to
proceed using the standard (non-HTTP) method used for other NetLinx Devices (via the master controller)
when
OK
is clicked.
Note that depending on network speed and the size of the *.kit file, this method could take up to 20-30
minutes to complete. More specifically, timed tests indicate that it takes approximately 60 seconds per 9.5MB
of a *.kit file to transfer. The following table indicates the approximate length of time to send a *.kit file via
the legacy file transfer method:
By default,
Change the HTTP Port used to transfer the KIT file...
is selected. Use this option to change the
HTTP port assignment, in cases where the IP port (default = 80) is in conflict or blocked on the PC. This
option will restart the web server with a different HTTP port assignment and restart the file transfer when
OK
is clicked.
Select the appropriate option and click
OK
to restart the file transfer.
Click
Cancel
to cancel the current file transfer.
FIG. 32
NetLinx Studio v3.4 or higher - HTTP Server Error dialog
File Size
Time Required to Complete Transfer (legacy file transfer method)
0-150MB
10 - 15 minutes
150-200MB 15 - 20 minutes
200-250MB 20 - 25 minutes
250-300MB 25 - 30 minutes
300-350MB 30 - 35 minutes
>350MB
> 35 minutes
Summary of Contents for MXD-701
Page 14: ...Modero X Series G5 Touch Panels 10 MXD T 701 7 Modero X Series G5 Touch Panels ...
Page 24: ...Installation 20 MXD T 701 7 Modero X Series G5 Touch Panels ...
Page 26: ...Configuration and Programming 22 MXD T 701 7 Modero X Series G5 Touch Panels ...
Page 34: ...Upgrading Firmware 30 MXD T 701 7 Modero X Series G5 Touch Panels ...