Settings Pages
21
Modero S Series Touch Panels - Configuration & Programming Manual
Setting Static IP Information
When using
DHCP
settings for a panel, the DHCP server will automatically populate almost all of the
Network Connections
page
fields, with the exception of
Hostname
. When setting the panel for
Static
, however, this information must be entered manually. To
enter the network connection information:
1.
In
DHCP/Static
, press the field until the entry reads “Static”. This enables all of the editable
Network Connections
page fields.
2.
Select the
IP Address
field to open the
Wired IP Address
keypad (FIG. 23).
3.
Enter the server’s IP address and click
OK
.
4.
Repeat this procedure with the other fields on the
Network Connections
page.
5.
When finished, the new connection information will be visible in the
Network Connections
page.
Entering a New Hostname
In order to facilitate DNS lookup of the panel, you should choose a new hostname for the panel.
NOTE:
If the “Synchronize Device Names” option in the Panel Configuration page (page 29) is enabled, the hostname is greyed out in
the Network Connection page and automatically set to the Device Name.
To add a new hostname, or to change an existing one:
1.
From the
Connection & Networks
page, select
Network Connection
to open the
Network Connection
page.
2.
From the
Network Connection
page, select
Hostname
to open the
Host Name
keyboard (FIG. 24).
3.
Enter the new hostname and press
OK
.
4.
The new hostname will now appear in the
Hostname
field.
Bluetooth
The
Bluetooth
page (FIG. 25) controls whether a touch panel allows access to previously selected Bluetooth devices, as well as
allowing new devices’ access.
FIG. 23
Wired IP Address keypad
FIG. 24
Host Name keyboard
FIG. 25
Bluetooth page
Bluetooth Page
Back:
Click the left-facing arrow to return to the previous page.
Connection Status:
A green bar signifies that the panel has an active connection to the Master.
Close:
Click the “X” button to shut the
Settings
page and return to the main display.
Bluetooth:
Click this button to enable or disable Bluetooth device access to the touch panel.
Set up new device...: Select to open the
Bluetooth Device Search
page (FIG. 26).
Device Name:
Displays the name of the Bluetooth paired device.
Device Address:
Displays the device of the Bluetooth paired device.