Settings Pages
15
Modero S Series Touch Panels - Configuration & Programming Manual
NOTE:
If the screen is not touched at that point, the device will automatically return to the
Calibration
page within 10 seconds.
In certain circumstances, you may wish to test the calibration of a panel without actually recalibrating it. The
Calibration Test
page
(FIG. 11) may be used to verify the accuracy of that calibration.
To calibrate the touch panel:
1.
From the
Settings
page, select
Display
.
2.
From the
Display
page, select
Calibration
.
3.
To test the calibration of the touch panel, select
Calibration Test
to open the
Calibration Test
page (FIG. 11).
4.
Touch the screen and note the positioning of the crosshairs based on where you touch.
5.
If the crosshairs do not match the places where you touch, then go back to calibrate the panel.
Sounds
The
Sounds
page (FIG. 12) allows adjustment of volume levels and panel sounds settings.
FIG. 11
Calibration Test page
FIG. 12
Sounds page
Sounds Page
Back:
Click the left-facing arrow to return to the previous page.
Connection Status:
A green bar signifies that the panel has an active connection to the Master.
Close:
Click the “X” button to shut the
Settings
page and return to the main display.
Panel Volume:
• Move the slidebar to the left or right to adjust the panel volume.
• Press the
Mute
icon to mute the panel.
Intercom Volume:
• Move the slidebar to the left or right to adjust the intercom volume.
• Press the
Mute
icon to mute the intercom.
Microphone Volume:
• Move the slidebar to the left or right to adjust the microphone input volume.
• Press the
Mute
icon to mute the microphone input.
Audio Devices:
Click this to open the
Audio Devices
page (page 16).