manualshive.com logo in svg

AMX Modero ViewPoint MVP-7500, Operation/Reference Manual, Page: 49 / 210

Share
Download
AMX Modero ViewPoint MVP-7500 Operation/Reference Manual Download Page 49

Configuring Communications

39

MVP-7500/8400 Modero Viewpoint Wireless Touch Panels

9.

From the Web Name keyboard, enter a unique alpha-numeric string to identify this panel. This 
information is used by the NetLinx Security Web Server to display on-screen links to the panel. 

The 

on-screen links use the IP Address of the panel and not the name for communication

 (FIG. 32).    

10.

Press 

Done

 after you are finished assigning the alpha-numeric string for the Web Control name.

11.

Press the 

Web Control Password

 field to open the Web Password keyboard.

12.

From the Web Password keyboard, enter a unique alpha-numeric string to be assigned as the G4 
Authentication session password associated with VNC web access of this panel.

13.

Press 

Done

 after you are finished assigning the alpha-numeric string for the Web Control password.

14.

Press the 

Web Control Port

 field to open the Web Port Number keypad.

15.

Within the keypad, enter a unique numeric value to be assigned to the port the VNC Web Server is 
running on. The default value is 

5900

.

16.

Press 

Done

 when you are finished entering the value. 

The remaining fields within the G4 Web 

Control Settings section of this page are read-only and cannot be altered.

17.

Press the 

Up/Down

 arrows on either sides of the G4 Web Control 

Timeout

 field to increase or 

decrease the amount of time the panel can remain idle (

no cursor movements

) before the session is 

closed and the user is disconnected. 

18.

Press the 

Back

 button to open the Protected Setup page.

19.

Press the on-screen 

Reboot

 button to save any changes and restart the panel.

FIG. 32  

Sample relationship between G4 Web Control and Mange WebControl Connections window

Verify your NetLinx Master’s IP Address and System Number have been properly 
entered into the Master Connection section of the System Settings page. 

Summary of Contents for Modero ViewPoint MVP-7500



















































































































































































































Reviews:

No comments