manualshive.com logo in svg

AMX Modero ViewPoint MVP-7500, Operation/Reference Manual, Page: 103 / 210

Share
Download
AMX Modero ViewPoint MVP-7500 Operation/Reference Manual Download Page 103

Setup Pages

93

MVP Modero ViewPoint Touch Panels

Features on this page include:  

Checking the Panel Statistics

1.

Press the 

Tools 

button in the 

Protected Setup Navigation Buttons

 section. This opens the 

Tools 

menu.

2.

Within the 

Tools 

menu, press the 

Panel Statistics 

button. All connection statistics are contained on 

this page, e.g., 

Received, Processed, and Dropped ICSP Messages

.

Refreshing the Panel Statistics

1.

Press the 

Tools 

button in the 

Protected Setup Navigation Buttons

 section. This opens the 

Tools 

menu.

2.

Within the 

Tools 

menu, press the 

Panel Statistics 

button.

3.

Push the 

Refresh

 button.

Panel Statistics Page 

Back:

Saves all changes and returns to the previous page.

Connection Status icon:

The icon in the upper-right corner of each Setup page shows online/offline state of 
the panel to the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark green 

every 5 seconds for half a second then go back to bright green.

• Bright yellow - panel missed a blink message from the master. It will remain 

yellow for 3 missed blink messages and then turn red. It will return to green 
when a blink message is received.

Note

: a Lock appears on the icon if the panel is connected to a secured NetLinx 

Master.

ICSP Messages

Messages sent between the master and the touch panel; it is the protocol they use 
to communicate to each other.

Total

• Received - The total ICSP messages received by the panel.
• Processed - The total ICSP messages processed by the panel.
• Dropped - The total ICSP messages dropped by the panel.

Last 15 Minutes

• Received - The total ICSP messages received by the panel in the last 15 

minutes.

• Processed - The total ICSP messages processed by the panel in the last 15 

minutes.

• Dropped - The total ICSP messages dropped by the panel in the last 15 minutes.

Blink Messages

The master sends this message once every 5 seconds to all connected devices.

Total

• Received - The total Blink messages received by the panel.
• Missed - The total Blink messages missed by the panel.

Last 15 Minutes

• Received - The total Blink messages received by the panel in the last 15 minutes.
• Missed - The total Blink messages missed by the panel in the last 15 minutes.

Ethernet Statistics

The Ethernet connection statistics for the panel.

Wireless Statistics

The Wireless connection statistics for the panel.

Clear

Clears all panel connection statistics.

Refresh

Refreshes all panel connection statistics.

Summary of Contents for Modero ViewPoint MVP-7500



















































































































































































































Reviews:

No comments