manualshive.com logo in svg

AMX Modero ViewPoint MVP-7500, Operation/Reference Manual, Page: 166 / 210

Share
Download
AMX Modero ViewPoint MVP-7500 Operation/Reference Manual Download Page 166

Programming

156

MVP-7500/8400 Modero Viewpoint Wireless Touch Panels

Panel Runtime Operation Commands (Cont.)

@AKB

Pop up the 

 

keyboard icon and 
initialize the text 
string to that 

 

specified. 

Keyboard string is set to null on power up and is stored until power is lost. The Prompt 
Text is optional.
Syntax:

"'@AKB-<initial text>;<prompt text>'"

Variables:

initial text = 1 - 50 ASCII characters.

prompt text = 1 - 50 ASCII characters.

Example:

SEND COMMAND Panel,"'@AKB-Texas;Enter State'"

Pops up the Keyboard and initializes the text string 'Texas' with prompt text 'Enter State'.

AKEYB

Pop up the 

 

keyboard icon and 
initialize the text 
string to that 

 

specified. 

Keyboard string is set to null on power up and is stored until power is lost. 
Syntax:

"'AKEYB-<initial text>'"

Variables:

initial text = 1 - 50 ASCII characters.

Example:

SEND COMMAND Panel,"'AKEYB-This is a Test'"

Pops up the Keyboard and initializes the text string 'This is a Test'.

AKEYP

Pop up the 

 

keypad icon and 
initialize the text 
string to that 

 

specified. 

The keypad string is set to null on power up and is stored until power is lost. 
Syntax:

"'AKEYP-<number string>'"

Variables:

number string = 0 - 9999.

Example:

SEND COMMAND Panel,"'AKEP-12345'"

Pops up the Keypad and initializes the text string '12345'.

AKEYR

Remove the

 

Keyboard/

 

Keypad.

Remove keyboard or keypad that was displayed using 'AKEYB', 'AKEYP', 'PKEYP', 
@AKB, @AKP, @PKP, @EKP, or @TKP commands.
Syntax:

"'AKEYR'"

Example:

SEND COMMAND Panel,"'AKEYR'"

Removes the Keyboard/Keypad.

@AKP

Pop up the 

 

keypad icon and 
initialize the text 
string to that 

 

specified. 

Keypad string is set to null on power up and is stored until power is lost. The Prompt Text 
is optional.
Syntax:

"'@AKP-<initial text>;<prompt text>'"

Variables:

initial text = 1 - 50 ASCII characters.

prompt text = 1 - 50 ASCII characters.

Example:

SEND COMMAND Panel,"'@AKP-12345678;ENTER PASSWORD'"

Pops up the Keypad and initializes the text string '12345678' with prompt text ’ENTER 
PASSWORD’.

Summary of Contents for Modero ViewPoint MVP-7500



















































































































































































































Reviews:

No comments