![background image](http://html.mh-extra.com/html/amx/hpx-1600/hpx-1600_installation-manual_2937749011.webp)
Installing the HPX-1600
7
HPX-1600 Retractable Connection Port
Installing the HPX-1600
ATTENTION READ THIS FIRST!
A typical installation will include several of various available modules listed in the
Product
Specifications
section on page 2. Each of these modules has specific instructions for terminating their rear
connections. Refer to the installation guide for each appropriate module during the installation of the
Hydraport system.
Read these instructions in their entirety before beginning the installation.
The installation requires specific steps to be performed the specified order.
Step 1 - Select an Installation Location
Note the space requirements for installing the system. FIG. 3 provides a dimensioned drawing of the
HPX-1600 System (above and below the table).
Only a professional, AMX-qualified installer should perform this installation.
Installation must conform to all local codes.
This product may not be installed by the end-user.
FIG. 3
HPX-1600 Space Requirements