![background image](http://html1.mh-extra.com/html/amx/g4-panelbuilder-v1-1/g4-panelbuilder-v1-1_instruction-manual_2938911018.webp)
Basic Operations
10
G4 PanelBuilder
3.
Now connect the Start element to the Navigation element. Click on the Exiting node (white) on
the Start element and drag it to the other element. All possible connections are indicated by a
green outline. If the connection cannot happen the outline is red. A connection line appears
between the two elements.
4.
You can now edit the properties for the Navigation element or select another element to add to
the diagram area.
FIG. 8
Drag Start node to Navigation element node
An element will populate the corresponding appropriate field, when connecting. This
saves you the trouble of naming element properties.
FIG. 9
Drag Navigation element node to Device element node
Navigation populated by Device element
Summary of Contents for G4 PANELBUILDER V1.1
