Basic Operations
12
G4 PanelBuilder
Saving A Project
To save a G4 PanelBuilder project file (*.PB4):
1.
Select
File > Save
. If this is the first instance of a save for your project, the Save As dialog
window launches.
2.
Type the File name in the field provided.
3.
Locate the directory you would like to save within.
4.
Place a check next to
Package template with project file
if you would like to include the .TPT
file with the .PB4 file. Doing this will allow you to open the G4 PanelBuilder file on other
machines running the application.
5.
Click
Save
.
Select
Save As
if you would like to save your project under another name or different location.
1.
Select
File > Save As
to launch the Save As dialog window.
2.
Type the File name in the field provided.
3.
Locate the directory you would like to save within.
4.
Place a check next to
Package template with project file
if you would like to include the .TPT
file with the .PB4 file. Doing this will allow you to open the G4 PanelBuilder file on other
machines running the application.
5.
Click
Save
.
Closing A Project
To exit an open project but leave G4 PanelBuilder running:
Select File > Close. If you have not already saved, the Close Project dialog window will
prompt you.
If the file save is current the file closes.
When you generate a TPDesign4 project G4 PanelBuilder stores information to the
.PB4 file. As a result the file will indicate being "dirty" or changed. You will need to
save the .PB4 file.
When you generate a TPDesign4 project G4 PanelBuilder stores information to the
.PB4 file. As a result the file will indicate being "dirty" or changed. You will need to
save the .PB4 file.
Summary of Contents for G4 PANELBUILDER V1.1
