Epica DGX 144 DVI Boards
62
Epica DGX 144 Instruction Manual
DVI Pinout
Pinout information for the DVI-I connector on DGX DVI input and output boards is provided in the
chart below FIG. 33.
* On the input connectors, pin 14 is a +5 V sink. On the output connectors, pin 14 is a +5 V source with a
maximum current limitation of 55 mA
FIG. 33
DVI-I connector pinout
DVI-I Pinout Information
1. Data 2-
9. Data 1-
17. Data 0-
C1. No connect
2. Data 2+
10. Data 1+
18. Data 0+
C2. No connect
3. Ground
11. Ground
19. Ground
C3. No connect
4. No connect
12. No connect
20. No connect
C4. No connect
5. No connect
13. No connect
21. No connect
C5. No connect
6. DDC-CLK
14. +5 V*
22. Ground
7. DDC-Data
15. Ground
23. CLK+
8. No connect
16. Hot-Detect
24. CLK-
Summary of Contents for Epica DGX 144
