AMX Endeleo Multi-Format Receiver UDM-RX02, Operation/Reference Manual

Page: 57 / 108

Configuration - Devices Page
43 UDM-0102 and UDM-RX02 Operation/Reference Guide
Sending a Command to IR-Controlled Devices
Use the Send to included link on the Control Bar of the Devices page (see FIG. 47 on page 39) to send an IR
command to one or more IR-Controlled Devices:
1.
Select the command that you want to schedule from the Control drop-down menu (see FIG. 50 on
page 41).
2.
Select an IR protocol for each device from the Protocol drop-down menu (see FIG. 51 on page 41).
3.
Select the Include checkbox for each device that you want to include in this scheduled event (FIG. 52).
4.
Click the Send to included link on the Control Bar to send the selected command (to the Included
devices only).
The IR protocols available for selection here are defined in the Protocols page (see
the Configuration - Protocols Page
section on page 51 ).
FIG. 55 Devices page (Control Bar) - Include checkboxes
Both devices are included to
receive the selected command