AMX Endeleo Multi-Format Receiver UDM-RX02, Operation/Reference Manual

Page: 33 / 108

Configuration
19 UDM-0102 and UDM-RX02 Operation/Reference Guide
Configuration
WebConsole Overview
Each UDM-0102 Hub can be configured for the correct network environment. Configuration options are
available via the UDM’s built-in WebConsole, as described in this section. The UDM-RX02 Receiver
connected to the UDM-0102 is also configured via the UDM-0102’s WebConsole.
This section describes the pages that comprise the UDM-0102’s WebConsole interface in the order that they
are presented (“Status”, “Setup”, "Inputs", "Devices" “Schedule” and “Protocols”). However, on initial
connection, you’ll probably need to visit the Setup page first, to specify network configuration and other basic
device setup options for the Hub.
See the Configuration - Setup Page section on page 33 for details.
Connecting to the UDM-0102
1.
The default IP address of the UDM-0102 is 192.168.0.96 .
2.
Enter the IP address into the address field within a browser window.
3.
To connect to the UDM-0102, a password is required .

The username should be left blank.

The password is admin (case-sensitive).
4.
On initial connection, the Status page is displayed (FIG. 14).
Use the included Ethernet Crossover cable for initial setup.
FIG. 13 Authentication dialog