Appendix C – Programmer’s Interface for System Diagnostics
47
Instruction Manual – BCS Basic Control Structure Protocol
Using BCS to Access System Diagnostic Information
Instructions are provided for accessing the lowest level of verbosity for all components and for accessing
a specific level of verbosity for a specific component.
To access the lowest level of verbosity for all components:
1.
Enter
~scr!
or
~scrv0i0!
Note:
Either of these commands provides a “menu” of the identity numbers and their corresponding
components (FIG. 2 on
page 45).
Only one verbosity setting and one component setting can be entered in a command. The order in which
the verbosity and component identity settings are entered is interchangeable.
To access a specific level of verbosity for a specific component:
1.
Enter
~scr
(to access the splash screen).
2.
Enter the verbosity level setting
v#
and the component’s identity setting
i#
.
Either may be specified first.
3.
Enter
!
(to send the command).
Diagnostic Command Examples
Diagnostic Commands for Products Supporting Component Information in Splash Screen
To access the diagnostic splash screen
~scr!
To access a specific level of information for a specific component.
Replace the “
#
”s with the applicable values (i = identity number, v = verbosity level)
~scri#v#!
BCS Command
Action
~scr!
or
~scri0v1
Accesses the lowest level of detail for all components
~scri6v3!
or
~scrv3i6!
Displays the highest level of detail for the power system
