Product Information
1
AXP-CPI16 16-Channel Custom Panel Interface
Product Information
The AMX AXP-CPI16 16 Channel Custom Panel Interface Board (FIG. 1) simplifies the process of
creating custom control panels for Axcess systems. Providing contact closure inputs and feedback
outputs for up to 16 buttons, the miniature PC board contains a 20-pin header for ribbon cable
installation or for direct mounting to a printed circuit board.
Specifications
The following table lists product specifications for the AXP-CPI16.
FIG. 1
AXP-CPI16 components
AXP-CPI16 Specifications
Dimensions (HWD)
2.75" x 1.75" x 0.062" (69.90 mm x 44.50 mm x 1.557 mm)
Power
• Input voltage: 12 VDC (nominal)
• Current draw: 25mA
Inputs
16 closure inputs with a common ground (GND)
Outputs
16 open-collector outputs, acting as switch to ground, up to 100 mA DC each for:
• Board is not to supply more than 750 mA of +12V total.
• Small incandescent lamps
• LED indicators - with series resistor (1K for 12 VDC)
• Relays - with DC coil
AXlink Connector
A 4-pin (male) connector attached to a four-wire cable which sends control data from the
Axcess CardFrame to the AXP-CPI16.
Headers
Two 20-pin headers included for ribbon cables (up to 100 feet each) or for mounting
directly to a PC board.
AXlink
Connector
20-Pin Header P3
Connect this side to the ribbon cable
-Pin Header P2
onnect this side to the ribbon cable
Connect this side to
the PC board
Pin 1
Pin 1
AXlink Status LED
Device
DIP Switch
Summary of Contents for AXP-CPI16
Page 4: ...ii AXP CPI16 16 Channel Custom Panel Interface Table of Contents ...
Page 8: ...Product Information 4 AXP CPI16 16 Channel Custom Panel Interface ...
Page 12: ...Installation 8 AXP CPI16 16 Channel Custom Panel Interface ...
Page 17: ...System Worksheet 13 AXP CPI16 16 Channel Custom Panel Interface ...
