AMX AXM-CP, Instruction Manual, Page: 19 / 156

Color Passive-Matrix LCD Touch Panels Installing the Touch Panel 11
1.
Cut the surface according to the cutout dimensions shown in Figure 9.
2.
Insert a flat-blade screwdriver into the release slot on the touch panel’s bezel
and remove the engraved overlay.
3.
Lay the touch panel face down onto a soft cloth and remove the four screws
from the low-profile back box. Remove the back box and discard.
4.
Place the BB-TP2 into the cutout and mark the threaded insert positions as
shown in Figure 9.
5.
Remove the BB-TP2 and drill four #6-32 insert holes. Then, place a threaded
insert into each hole.
Figure 9
AXU-CP or AXU-CP/PB, and
BB-TP2 cutout dimensions for
plasterboard