AMX AXM-CP, Instruction Manual, Page: 116 / 156

108 Touch Panel Program Reference Color Passive-Matrix LCD Touch Panels
Receive file
Touch the RECEIVE FILE option to open the decision box in Figure 186.
YES NO
PRESS YES FOR BUSS
TRANSFER. PRESS NO
FOR RS232 (9 PIN D)
You can receive files from a PC using the AXlink connector or RS-232 (DB-9)
connector on the touch panel. The PC must be running TPDOC before you can send
touch panel drawings. Refer to
TPDOC Instruction Manual for more information. Use
the SAVE option if you want to save a file stored in the touch panel.
•
YES Receives the PC file via the AXlink connector on the touch panel, and
opens the decision box in Figure 187.
•
NO Receives the PC file via the RS-232 connector on the touch panel, and
opens the decision box in Figure 187.
YES NO
THIS WILL DESTROY
SOME PANEL DATA
PRESS YES TO CONTINUE
•
YES Receives the PC file. Press the EXIT button when the FILE TRANSFER
page appears to cancel the file transfer and return to the current page.
•
NO Cancels the file transfer and returns to the current page.
Move edit bar
Touch the MOVE EDIT BAR option to move the Edit Bar to the top or bottom of the
screen.
Note
The receive file step is not
required if the touch panel is
connected directly to the
AXCESS Control System.
Figure 186
Transfer type decision box
Caution
All files stored in the touch
panel before the transfer will be
erased and cannot be restored.
The touch panel will not erase
stored drawings or symbols.
Figure 187
Continue decision box