AMX AXM-CP, Instruction Manual, Page: 137 / 156

Color Passive-Matrix LCD Touch Panels Replacing the Lithium Batteries 129
11.
Rotate the circuit card back to the original position and place it in the touch
panel housing. Align the screw hole and insert the Phillips-head screw and
tighten.
12.
Place the bottom panel on the touch panel and align the screw holes. Insert the
seven Phillips-head screws and tighten.
13.
Plug all connectors back into the touch panel.
AXU-CP, AXU-CP/PB, AXM-CP, and AXM-CP/PB
Remove the lithium batteries from the touch panel:
1.
Discharge the static electricity from your body by touching a grounded object.
2.
Insert a flat-blade tool into the release slot on the touch panel’s bezel and
remove the engraved overlay.
3.
Remove the four #6-32 mounting screws and carefully lean the touch panel
backward to expose the connectors.
4.
Disconnect all the connectors and remove the touch panel from the back box or
equipment rack.
5.
Flip the touch panel facedown onto a soft cloth. Figure 203 shows the batteries
on the touch panel’s circuit card.
Lithium batteries
Figure 203
Battery locations on the touch
panel circuit card