![background image](http://html.mh-extra.com/html/amx/axf-mini/axf-mini_instruction-manual_2937811005.webp)
Product Information
1
AXF-MINI Axcess Mini-CardFrame
Product Information
The AXF-MINI Axcess Mini-CardFrame can be used as a stand-alone control system or as an add-
on to existing Axcess or Axcent
2
systems. The stand-alone configuration uses an optional AMX
Enhanced Master card (AXC-EM) and up to three optional AXC control cards. The add-on
configuration uses up to three optional AXC cards and is connected via the AXlink data/power bus
along with control panels and AXB AXlink controllers. The MINI CardFrame features a new
backplane design incorporating all card server functions, eliminating the need for a dedicated card
slot. The CardFrame can be easily installed into a rack, shelf, or at a remote site to avoid costly
cable runs.
Specifications
The following table lists the specifications for the AXF-MINI.
FIG. 1
AXF-MINI Axcess Mini-CardFrame
AXF-MINI Specifications
Dimensions (HWD):
1.75" x 17" x 13.64" (4.5 cm x 43.2 cm x 34.7 cm)
Weight:
5.5 lbs. (2.49 kg)
Backplane Components:
Master Card Slot
One master processor card slot.
Control Card Slots 1 - 3
Three standard Axcess control card connections (slots 1, 2, and 3).
Slots 1 - 3 are wired according to the installed card. Refer to the appro-
priate cards wiring information for instructions.
AXlinx connector
Install AXlink data/power bus wiring as shown below after device num-
ber is set. Remove and reconnect AXlink terminal after changing
device number to enter the new number in memory.
PWR Connector
The three PWR wiring configurations are:
• Server/Remote power
• Server/Local power
• Master
Refer to the
Power Configuration Options
section for wiring information
on each configuration.
AXC-EM Enhanced Master Card
Three AXC Control
Built-in Card Server
Cable Support Bracket (optional)
Card Slots