manualshive.com logo in svg

AMX AXD-CP4, Instruction Manual

Share
Download
AMX AXD-CP4 Instruction Manual Download Page 6

Product Information

2

4" Color Touch Panels

Cleaning the Touch Overlay

You should clean the touch screen overlay often. Always use clean cotton cloths, and a spray bottle 

of cleaning solution consisting of 50% isopropyl alcohol and 50% water.

Specifications (Cont.)

External Buttons

6 fixed-external backlit illuminated pushbuttons (illumination is user enabled/
disbaled via the pushbuttons illumination feature). Pushbutton assignments can 
include the typical Device/Channel numbers, Flip to Page option, and String/Macro.

Button Characters

• Top row of four buttons - Seven characters using a 10pt Century Gothic font

• Bottom row of two buttons - Seven characters using a 7pt Century Gothic font

Light Detector

Photosensitive light detector for adjustment of the panel brightness.

Motion Sensor (PIR)

• Proximity Infrared Detector to wake the panel when the panel is approached.

• Activation range: + 20° vertically from center and + 45° horizontally from center. 

Memory

512 KB of SRAM and 2 MB of Flash for a total memory of 2.5 MB 
(only 2 MB is available for buttons, icons, bitmaps, and fonts).

Character Support

Unicode

®

 character support for far-eastern languages such as Chinese. 

Characters for middle-eastern languages such as Arabic are not supported within 
the Unicode fonts because they are bi-directional. Buttons with Unicode fonts can 
only be created and edited using TPDesign3 and NetLinx Studio. Refer to the 
respective manuals for additional information.

Viewing Angle

• Horizontal viewing angle: + 50°

• Vertical viewing angle: + 50°

Rear Connectors:

AXlink

4-pin bus connector for connection to the AMX Central Controller.

RS-232

DB-9 male connector for data transmission or Microsoft

®

 mouse control.

Compatibility

Axcess, NetLinx, and Landmark systems (AXlink is the most common control 
standard for this system)

Operating Environment

• Indoor operation at temperatures between 10

º

 C (50

º

 F) to 40

º

 C (104

º

 F) and a 

humidity range of 5% to 90% RH (non-condensing)

Installation kit

• 4-pin AXlink data/power connector

• Drywall clip set (2 -drywall clamps and 2- #8 (2" long) screws

• 4-#4-40 machine screws and threaded inserts

Enclosure

• Metal sub-plate and bezel with black or white matte finish

• Detachable front panel bezel

Installation Cutout

Cutout Template for the AXD/T-CP4 is available as an insert in the product 
packaging and from AMX as drawing number 62-5921-02. This file provides 1:1 cut-
out dimensions for the CP4 conduit/wallbox. For a replacement cutout, please call 
your AMX sales representative.

Optional Accessories

• PSN2.8 Power supply (can be used on the CP4) (

FG423-17

)

• PSN6.5 Power supply (recommended for use on the CP4) (

FG423-41

)

• CB-CP4 Conduit/wallbox (includes flanges for installation to studs during the 

construction phase). (

FG028-10

)

• Conduit/Wallbox should only be mounted to a beam before a drywall is 

installed (pre-wall).

Summary of Contents for AXD-CP4



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands