AMX AXD-CP4, Instruction Manual

Page: 36 / 66

Programming
32
4" Color Touch Panels
System Send_Commands (Cont.)
LSDM
Enables/disables
the Dim-Room
mode.
The Dim-Room mode is also set with the LIGHT DIM MODE button on the Adjust Sensors
page.
Syntax:
"’LSDM,<n>’"
Variables:
n = 0, turns OFF the Dim-Room feature (disable).
n = 1, turns ON the Dim-Room feature (enable).
Examples:
SEND_COMMAND TP,"’LSDM,0’"
Disables the light sensor DRM feature.
SEND_COMMAND TP,"’LSDM,1’"
Enables the light sensor DRM feature.
PAGE
Flips to a page
with a specified
page name.
Syntax:
"’PAGE-<page name>’"
Variable:
page name = 1 - 50 ASCII characters
Example:
SEND_COMMAND TP,"’PAGE-MAIN PAGE’"
Flips the touch panel to the page named MAIN PAGE.
PBIL
Assigns the push-
button illumina-
tion modes.
The button illumination features are also set using the three illumination buttons on the
Adjust Sensors page.
Syntax:
"’PBIL,<n>’"
Variable:
n = Pushbutton illumination mode value:
Example:
SEND_COMMAND TP,"’PBIL,2’"
Sets the pushbuttons to illuminate when the Passive Infrared sensor (PIR) detects the
presence of a user.
PKEYP
Displays aster-
isks (*) for keypad
entries.
Syntax:
"’PKEYP-<number string>’"
Variable:
number string = 0 - 9999
Example:
SEND_COMMAND TP,"’PKEYP-1988’"
Displays the touch panel keypad with **** instead of 1988.
Mode # <n>
Mode Description
0 Disabled (illumination Off)
1
Enabled (illumination On)
2 PIR Automatic (illumination based on PIR detection)
3
LS Automatic - button illumination is based on the
4
PIR/LS Automatic - a combination of options 2 and 3.
light sensor detection of a dim or normal room mode.
The order of precedence is PIR then the LS.