![background image](http://html.mh-extra.com/html/amx/axcent3-pro/axcent3-pro_instruction-manual_2937809024.webp)
Axcess Programming
20
Axcent
3
and Axcent
3
Pro Integrated Axcess Controllers
PROGRAM Port Commands (Cont.)
SET BASE DEVICE
NUMBER
Master and
Slave
Sets the AXlink base device number on the controller’s RS-232 port
1. Subsequent ports on the controller are incrementally set. If the
device number is 1, the controller becomes an AXlink bus master,
and if the device number is set to 2-xxx, the controller becomes a
slave.
Syntax:
SET BASE DEVICE NUMBER <Device>
Variables:
Device = 1 - 238
SET DATE
Master
Changes the date in the controller.
Syntax:
SET DATE
SET TIME
Master
Changes the time in the controller.
Syntax:
SET TIME
SHOW DEVICE
Master
Displays a list of all devices present on the AXlink bus.
Syntax:
SHOW DEVICE
SHOW INPUT OFF
Master
Sets Show Input mode off.
Syntax:
SHOW INPUT OFF
SHOW INPUT ON
Master
Sets Show Input mode on.
Syntax:
SHOW INPUT ON
SLOT
Master
The active controller returns its slot number.
Syntax:
SLOT
SYSTEM RESET
Master
The controller stops communication on AXlink for 2 seconds and
then restarts. The system program then restarts according to the
Define_Start section.
Syntax:
SYSTEM RESET
TIME
Master
The controller returns the time in its internal clock.
Syntax:
TIME
VERSION
Master and
Slave
Displays current software version of the controllers.
Syntax:
VERSION
Summary of Contents for Axcent3 pro
Page 4: ...ii Axcent3 and Axcent3 Pro Integrated Axcess Controllers Table of Contents ...
Page 27: ...Axcess Programming 23 Axcent3 and Axcent3 Pro Integrated Axcess Controllers ...
Page 28: ...Axcess Programming 24 Axcent3 and Axcent3 Pro Integrated Axcess Controllers ...
Page 33: ...Updating Firmware 29 Axcent3 and Axcent3 Pro Integrated Axcess Controllers ...