Product Overview and Specifications
24
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
Quick Reference Table – Modes for Handling Addressing/Networking (continued)
Master Connection
Modes
Master Connection Modes refer to the modes of communication used for connection
to the Master as specified via the SET CONNECTION Telnet command.
Auto Mode:
• This mode utilizes TCP communication. It looks for a matching System Number and
attempts to come online with the first Master it sees with that System Number.
TCP URL Mode:
• TCP; the Master is specified via URL.
UDP URL Mode:
• UDP; the Master is specified via URL.
NDP Mode (Default):
• UDP; utilizes the NDP binding process to assign the DXLink Module (the physical
device) to a Master (or Virtual Master) via NetLinx Studio. Once bound,
communications are conducted via UDP.
For further information, see “Master Connection Modes” on page 119.
IR SEND_COMMAND
Modes
IR SEND_COMMAND Modes refer to displaying and setting the IR port active
system settings as IR, Serial, or Data modes.
GET MODE SEND_COMMAND:
• The GET MODE SEND_COMMAND reveals the active system (IR, Serial, or Data)
settings.
SET MODE SEND_COMMAND:
• The SET MODE SEND_COMMAND changes the active system settings.
For further information, see “IR SEND_COMMANDs” on page 91.
Quick Reference Table – Modes for Handling Video Processing
Mode
Description
Scaling Modes
Scaling Modes refer to how the system alters or maintains a source device’s
resolution as it is passed along to the destination device. The Scaling Mode can be set
on the HDMI RX with the Scaling button (see page 59), or with SEND_COMMANDs
(see page 81), or though DGX Configuration Software when scaling is being done via
an Enova DXLink Output Board.
Auto Mode (Default):
• Auto Mode (SmartScale
®
) allows the destination device to choose the resolution
it needs.
Manual Mode:
• Manual Mode allows the user to configure the resolution the video will display
through a destination device.
Bypass Mode:
• Bypass Mode allows the video signal to display over the destination device without
altering the signal’s resolution.
