www.amtren.com
Page 6
1.5 Review Connections
Please review your entire unit and be sure that you have the following:
USER CONNECTION
Two power connections
1. AC power to the publisher unit
2. AC power to the printer’s power supply module DC output to the printer unit
1 USB cable connected to your PC
3. USB cable from your PC connects to the USB ports on the rear of the FlexWriter labeled
“USB to PC.”
1 Firewire© cable connected to your PC
4. Firewire© cable from your FlexWriter to your PC’s Firewire© port.
FACTORY CONNECTION
5. Printer control cable (5 Pin DIN) connects the base autoloader to the printer.
6. USB printer cable connects the printer to the base autoloader.
NOTE:
The cables listed in numbers 5 and 6 were factory connected, please verify their
connection.
The autoloader should still be turned off at this point. It will be turned on after FlexWare
is installed.
