www.amtren.com
Page 19
You are now ready to start creating and duplicating CD/DVDs.
The next steps will take you through a typical setup and usage of the FlexWriter. It is recommended
to follow these steps and produce a test job, then move on to the many other functions and features of
the FlexWriter.
Load blank Ink Jet media onto the input spindle. The input spindle has three silver rods located
around the outside edge of the media. Please be sure the media does not stick together and that the
media lays flat in the input spindle.
Place a CD-R to be copied on top of the blank media in the input spindle. This will be the ‘master’ for
this test run. Use of small image will allow the test run to be faster.
On the Desktop, click on the
FlexWare ICON
You will see the FlexWare splash screen.
CAUTION: IF FLEXWARE DOES NOT DETECT THE AUTOLOADER UNIT AN ERROR
MESSAGE WILL BE DISPLAYED. MAKE SURE THAT THE AUTOLOADER IS
CONNECTED WITH ALL USB DRIVERS INSTALLED PROPERLY.
6.0 USE THE SYSTEM
