www.amtren.com
Page 15
Turn on the FlexWriter VI by flipping the large power switch located on the rear of the unit. Once
power is applied, Windows will detect new hardware.
1. USB drivers for controlling the autoloader.
2. USB high speed serial converter.
3. USB drivers for the autoloader’s writing drives.
4. USB driver for the USB 2.0 hub.
5. USB driver for the disc printer.
Ensure that all the cables are properly connected and that the Installation & Support CD is still in the
computer’s drive.
•
Minimize the Installation and Support web page, if necessary.
•
Follow the on screen directions to install all the necessary drivers.
•
Allow Windows to install the drivers automatically.
•
Do not allow Windows to check the Internet for drivers.
•
Click OK when Windows warns that the drivers have not passed XP certification.
If necessary, refer to the Troubleshooting section at the end of the manual for more detailed
instructions for the installation of the drivers.
All of these drivers are
required for the proper
operation of the duplicator.
Once the installation process
begins, please allow each pop
up to continue.
DO NOT
cancel any install dialogues
that appear
.
Once the drivers
are successfully installed,
Windows will display a
message stating,
“Your new
hardware is installed and
ready to use.”
3.0 DRIVER INSTALLATION
