AMT Datasouth Codewriter 4500 Series Page 91 Operator'S Manual Download | Manualshive

Page: 91 / 94

background image

Advanced Features

81

Advanced Features

Flash Memory Management

The CodeWriter 4500 Series printer provides the user with a dedicated 32k area of
flash memory to store applications or label formats. To use this area the user must
understand how to access the area and copy the application to the printer. The
following information is provided to assist the user in understanding the function of
the flash memory on this printer and how they can interact with it.

The firmware contains several front panel button press combinations that can
influence the power-up initialization of the printer.

High Speed Firmware Update Download Mode

Hold down the

ONLINE

PAUSE

and

buttons while turning on power. Do not

release until the printer displays the “>> Flash Boot <<” message.

This places the printer into the high speed firmware update download mode.
In this mode, the printer will accept firmware downloads at strictly 115,200
baud. Firmware downloads require a special application on the host computer
which Datasouth provides along with firmware updates. Firmware downloads
cannot be performed by operators using terminal emulation or other generic
host applications.

Although very unlikely, the potential exists for operators to corrupt any
existing firmware within the printer by accessing the firmware update
communications mode using improper host software. If this occurs, the printer
will require a new firmware download to correct the problem.

Auto-Baud Firmware Update Download Mode

Hold down the

ONLINE

PAUSE

and

ITEM

FEED

buttons while turning on power. Do not

release until the firmware displays the “>> Flash Boot <<” message.
Exactly the same as the High Speed Firmware Download Mode, except the
firmware will perform an autobaud operation when initially establishing
communication with the download application on the host computer. This
mode will only autobaud to between 2,400 and 57,600 baud. In order to
perform a high speed 115,200 baud download, the operator must select the
high speed download mode.

«
...
89
90
91
92
93
...
»

Summary of Contents for Codewriter 4500 Series































































































Reviews:

No comments

Related manuals for Codewriter 4500 Series

Brand: Xante Pages: 21

Magicolor 2 Desklaser

Brand: QMS Pages: 60

Brand: uBuild-3D Pages: 12

Brand: Canon Pages: 4

PIXMA TR4500 Series

Brand: Canon Pages: 100

Brand: Durst Pages: 2

Brand: Roland Pages: 44

Brand: Star Micronics Pages: 24

Brand: ICT Pages: 34

Brand: Oki Pages: 94

Markoprint X4JET

Brand: Weber Pages: 177

Brand: TEC Pages: 92

Brand: Ricoh Pages: 177

Brand: Xerox Pages: 342

Brand: Fujitsu Pages: 12

Brand: Fujitsu Pages: 264

Brand: NEC Pages: 9

Pinwriter P5200

Brand: NEC Pages: 9

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands