AMT Datasouth Codewriter 4500 Series, Operator'S Manual

Page: 24 / 94

Quick Start Guide
14
Set Print Parameters
The factory settings for the printer will include a setting for print darkness for
effective printing on media shipped with the printer. If the media you’ve
selected for the printer was not included with the printer, the following
procedure provides a print setting that will image most media. The manual’s
Media Settings section provides complete details for determining the best
setting for the media.
1. Press the
ONLINE
PAUSE
key. This takes you to the off-line menu.
2. When
Interface Status Off-Line
is displayed, press the
MENU
key. This
will take you the to the
Print Parameters
menu.
3. Press the
ITEM
FEED
key. Print Speed is the first parameter displayed. The
Print Speed value represents a percentage of the printer’s full speed value.
Press the or
CANCEL
key and change the value to match the Print
Speed value associated with printer model in the following table.
Printer Model Print Speed
4505 100%
4505+ 100%
4510 50%
4. Press the
ITEM
FEED
key again. Print Darkness is the next parameter
displayed. Use the or
CANCEL
keys to set the value to
80%
.
5. Press the
ONLINE
PAUSE
key. If any parameters were changed, the display will read
ENTER to save new defaults . Press the
ENTER
PRINT
key to save these values.