AMT Datasouth Codewriter 4500 Series, Operator'S Manual

Page: 37 / 94

Media Settings
27
Media Settings
This section examines the CodeWriter 4500 Series printer settings related to the
document (labels) and ribbon, and obtaining the desired print quality. Following these
instructions carefully will result in a trouble-free initial setup and repeatable results.
Setting the Document Dimensions
The 4500 Series printers are compatible with the following type of documents:
ƒ Die-cut labels with Translucent Backing/Liner
ƒ Black Bar
ƒ Notch or Hole
ƒ Continuous Forms (no size marking)
Each label type requires Operator Panel settings to accurately reflect the label
dimensions.
Die-Cut Labels
Figure 10 provides an example of a die-cut label and the dimensions required
for setting up the printer.
Figure 10 – Die Cut Label Dimensions
Label Width
Label
Length
Label Gap