1
Description
2
Features
3
Complete Kit Parts List
4
Precautions
5
Installation Procedures
7
The Counter Display Settings
8
The Video Sensor Settings
9
Troubleshooting
10
Specifications
6
Front Panel Controls and Names
Contents
Thank you for purchasing AMSECO VDP-100 Video-Eye People Counter . Please read this manual thoroughly
before making connections and operating the unit. Following the instructions in this manual will enable you to
obtain optimum performance from the system.
Please retain this manual for future reference.
TM
System Specifications
Model Name
VDP-100 Video-Eye People Counter
Operating Voltage
Video Sensor Unit
12V DC
Counter Display
12V AC / 15VA
Power Consumption
Stand by
400mA
In Alarm
600mA
Size (h x w x d)
Video Sensor Unit
5.1" x 3.1" x 1.8" (130 x 80 x 47 mm)
Counter Display
4" x 3.3" x 1.2" (102 x 85 x 31 mm)
Traffic Detection Method
by a Motion Detection Video Camera
Image Sensor
1/4 inch Color CMOS Sensor
Lens Angle
90 degree
Sensor Image Resolution
Horizontal 300 lines
Video Format
NTSC
Processor
BF531 Digital Signal Processor
Counter
6 digits (999,999) of independent Entry / Exit Dual Counter
Chime Sound
Two distinctive chime sounds announcing entry / exit event
Chime Type
Volume Adjustable Electronic Chime(0~85db)
Operating Temperature
14¨¬
F
~
1
2
2
¨¬
F
Required Illumination
Recommend 7 LUX~3,000 LUX (Indoor Use)
Installation Heights
Recommend to install between 7~14 feet high from the floor
Detection Area
10 feet wide when installed at 8 feet high
17 feet wide when installed at 14 feet high
Wires Specifications
Connector Cable
Two 26 ft. AWG # 22 wires for 12V DC Output
Two 26 ft. AWG # 24 wires for Signal Output
* Wires of AWG # 20 or more are required for connecting the Counter Display and the Video
Sensor Unit at over 300 ft.
Power Cord
Two 6 ft. AWG # 22 wires for 12V AC Output
Power Transformer Specifications
Power Transformer
Input
120V AC, 60Hz
Output
12V AC
Specifications
10. Specifications
11
TM
