Troubleshooting
9. Troubleshooting
10
Condition: Cannot get the system power on.
Check the power cable connections both of power transformer and the Counter Display terminal.
Check whether the in-line switch is ON.
Make sure your power source is 120V AC 60Hz.
Condition: Counter is ON but the status LED of the Video Sensor Unit is off.
Check the wiring connection of the counter unit terminal and 4P connector.
In case you have extended the length of wires, check whether you have used wires of required gage
(AWG # 24 by 100 ft. / AWG #22 or above for over 100 ft)
Condition: Status LED is ON and blinking on traffic events, but the Counter doesn't count at all.
Check the signal cable connections.
Condition: Counter is not accurate.
Ensure you have installed the system in the environment as required in this instruction manual such as
illumination condition, installation heights or the floor condition.
Move the installation position or
reduce the illumination of the room if the shadows of people generate false counting.
Check whether the Video Sensor unit is facing in parallel with the floor.
Condition: Can't get the Chime Sounds.
Check the volume control.
Check the Speaker connector in the Video Sensor Unit.
Condition: I get the ENTRY chime sounds and counts when EXIT events occur, while getting
EXIT chime sounds and counts on ENTRY events.
Check whether you have installed the Video Sensor Unit in the correct direction. Rounded end of the
Unit must face the door (heading EXIT direction) for proper operations.
1. Descriptions
AMSECO VDP-100 Video-Eye People Counter is the digital image tracking technology based people traffic
counter and door announcer system integrating a Video Camera as a detecting sensor. The system
distinguishes and counts entry / exit traffic events simultaneously
by its unique Object's Motion Detection
Algorithm, and provides the users very useful information on accumulated entry /exit traffic counts in offices,
retail shops, department stores, or any other facility as well as announcing people's entry or exit events with
pleasant chime sounds.
You can also use the VDP-100 as a monitoring camera by simply connecting its video output to any NTSC
monitor.
2. Features
Entry / Exit Distinguishable People Counter
discriminating the object's moving direction and
counting entry /exit events separately
S i x D i g i t R e s e t ta b l e C o u n t e r
c a p a b l e o f
displaying up to 999,999 counts of the entry or exit
events
Two Distinctive Chime Sounds
to announce
Entry and Exit Event separately
Adjustable Chime Volume
Easier Installations
not requiring additional
reflector installations or adjustments
Ceiling Mount
CMOS Color Video Camera integrated
Digital Signal Processor (DSP) driven system
NTSC Video Output
ready to be used as the
monitoring camera
Counter Memory Back-up
from accidental Power
failure
Tamper Protection
from blocking camera's view
Descriptions / Features / Complete Kit Parts List
3. Complete Kit Parts List
EN
TR
Y
X
T
E
I
Upon opening of the package please ensure the following parts are enclosed properly before installation.
[1] Power Cord with
In-line-switch
[1] Power
Transformer
[1] Mounting
Bracket
[1] 4P Connecting
Cable
[1] Video
Cable
[1] Manual
[1] Counter Display
Unit
[1] Video Sensor
Unit
[4] Mounting
Screws
VD
1 0
P- 0
R /
N
I
E
T
T
Y
E
X
3
ENTRY/EXIT
VIDEO-EYE PEOPLE COUNTER
TM
