Amsco 36 H, Operator'S Manual

Page: 81 / 152

7-3
Cycle and Control Value Programming Operator Manual P129394-068
Cycle values (sterilize temperature and time, and dry time are
adjustable within the limits shown in
Table 7-1 .
• TEMP: For changing sterilize exposure temperature within the
ranges shown.
• STER: For changing the sterilization exposure time. Use
number touchpads to enter a new value. Left and right arrow
touchpads can be used to cursor through an existing value.
•
DRY:
For changing the dry time.
NOTE: To return cycle values to original state, press RESTORE ALL
DEFAULT VALUES. This touchpad can also be used to cancel
previous changes to a cycle.
Once all values for the selected cycle have been adjusted, press
EXIT to save new values and return to the cycle selection display.
Upon leaving Change Values the control prints the changed cycle
values.
LIQUID GRAVITY PREVAC
SELECT NEW CYCLE NAME
OR SELECT ANOTHER ITEM TO CHANGE
12
TEMP STER DRY NAME
NONE EXIT
TEMP STER DRY NAME
SELECT NEW DRY TIME
OR SELECT ANOTHER ITEM TO CHANGE
RANGE = 0-99 MINUTES
13
1 2 3 RESTORE ALL
DEFAULT VAL-
UES
4 5 6
7 8 9
EXIT
<- 0 ->