L0192A
2
Model Number Breakdown (CONT.)
SERIAL NUMBERING SYSTEM
Please See
Figure 1.1
on Page 1. The serial number is
constructed as follows:
On all AMS serial numbers, the first digit identifies where a
merchandiser was manufactured. Those merchandisers built in
the U.S. start with the number
1
. Those merchandisers built in
Mexico start with the number
2
.
The next two digits identify the year of manufacture. These
numbers are
18
(for 2018) and so forth.
The next two digits identify the month. The first month of the year
is
01
and the last month is
12
.
The last four digits identify the number assigned to each
merchandiser during assembly. Numbering starts with
0001
and
continues through
9999
, whereupon these four digits start over.
An example of the numbering system in use is as follows:
1-1802-1254
This merchandiser was manufactured at the Kearneysville, W.V.
plant in 2018, in February, and was the 1254
th
merchandiser
manufactured.
GENERAL SPECIFICATIONS
Operating Environment
These AMS vendors are designed for indoor use only. Indoor
temperatures must be between 35°F (1°C) and 110°F (43C).
The vendor should not be located in an area where it may be
subjected to direct sunlight, a water jet, or rain.
Model Touchless
Cabinet Dimensions: (See
Figure 1.2
on page 3.)
39”W x 72”H x 36”D
(99.8 cm x 183 cm x 91 cm)
Cabinet Weight: Approx. 544 lbs. (247 kg)
Product Capacity:
Capacity depends on configuration: The maximum capacity
would be: 32 count helices * 12 selections/tray * 7 trays, for a
total of 2688 units max.
Product Loading:
Trays can be loaded with a maximum of 8 pounds per selection;
this yields a maximum loading of 96 pounds per tray.
Power Requirements:
United States,
Canada and Mexico:
115 VAC, 60 Hz
1.25
Amps,
40
Watts
Energy Consumption
Daily energy consumption varies due to input voltage and
manufacturer of cash and/or cashless devices/ and lighting
adjustments but the following nominal value is presented for
comparison only.
Touchless 1.2
KWH/day
Patent Disclosure
This vendor and/or certain of its components are covered by one
or more of the following U.S. and International patents:
U.S.
6,145,699 6,384,402
6,520,373
6,708,079
6,794,634
7,191,915
7,343,220 7,742,837
7,446,302
8,003,931
Canada:
2,329,314
Mexico:
230,714
Other Patents are Pending
1
INTRODUCTION
1-1802-1254
Built
Year Month Sequence
Summary of Contents for TOUCHLESS
