background image

3: BIOS Setup Utility

 

 

27

HotKey Select 

If the item KeyBoard PowerOn is enabled, you can 
use this item to select the hot keys to power on 
the system. 

 

PCI / Plug and Play Setup Page 

This page sets some of the parameters for devices installed on the 
PCI bus and devices that use the system plug and play capability. 
 

AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP  

(C) 2000 American Megatrends, Inc. All Rights Reserved 

 

Plug and Play Aware O/S Yes 
Primary Graphics Adapter PCI 
PCI VGA Palette Snoop Disabled 
Allocate IRQ for PCI VGA Yes 
 

 

ESC  :  Quit             

-¯¬®

  :  Select Item 

F1     :  Help             PU/PD/+/-  :  Modify 
F5     :  Old Values   (Shift)F2    :  Color 
F6     :  Load Optimal values 

F7     :  Load Best performance values 

 

Plug and Play 

Aware O/S 

Enable this item if you are using an O/S that 
supports Plug and Play such as Windows 95 or 
98. 

Primary Graphics 

Adapter 

This item indicates if the primary graphics adapter 
uses the PCI or the AGP bus.  The default PCI 
setting still lets the onboard display work and 
allows the use of a second display card installed in 
a PCI slot. 

PCI VGA Palette 

Snoop 

When this item is enabled, multiple VGA devices 
operating on different buses can handle data from 
the CPU on each set of palette registers on every 
video device. 

Allocate IRQ for 

PCI VGA 

If this item is enabled, an IRQ will be assigned to 
the PCI VGA graphics system. You set this value 
to No to free up an IRQ.  

 

Summary of Contents for M817 Series










































Reviews: