3: BIOS Setup Utility
25
PS/2 Mouse
Support
If this item is set to Enabled, the onboard PS/2
Mouse port will work. Setting this to Disable turns off
the port.
Boot to OS/2 >
64MB
Enable this item if you are booting the OS/2
operating system and you have more than 64MB of
system memory installed.
L1/L2 Cache
Leave these items enabled since all the processors
that can be installed on this board have internal
cache memory.
DRAM Time/
Freq. by SPD
This item allows you to enable or disable the DRAM
timing/Frequency defined by the Serial Presence
Detect electrical.
DDR/SDR CAS
Select
If the item DRAM Time/Freq. by SPD is disabled,
you can use this item to determine the operation of
the DDR/SDRAM memory CAS (column address
strobe). We recommend that you leave this item at
the default value.
Dram
Performance
If the item DRAM Time/Freq. by SPD is disabled,
you can use this item to select the performance of
the installed SDRAM. We recommend that you
leave this item at the default value.
AGP Delay
Offset
This item can be used to offset driving current on
the delay of AGP cards. Some AGP cards need
delaying than normal driving current in order to
operate. We recommend that you set this item to
Auto by default.
AGP Driving
Strength
This item can be used to signal driving current on
AGP cards to auto or Manual. Some AGP cards
need stronger than normal driving current in order to
operate. We recommend that you set this item to
Auto by default.
