AMPTEC RESEARCH accepts “VISA or MC” Credit Card
620A-4, 620BH, 620VL, 620VN etc. compatible
Phone +01 (512) 858-4045
FAX +01 (512) 858-4340
www.amptec.com
Austin, TX USA 78737
All AMPTEC 620 series test lead and probe sets are a minimum 48" length,
dual banana termination at the ohmmeter end (call the Sales Department at
AMPTEC RESEARCH for any custom requirement).
Option "110"
Test Lead Pouch
(
Mounted on the 620A4 top lid
)
with
enough storage room to hold a variety of test leads and accessories (see
photo above).
Option "300"
Gold Plated Four Terminal Kelvin Clip Test Lead Set
open
to ½" for connection to wires, lugs, etc.
Option "302"
Gold Plated Banana Jack Backed Four Terminal Kelvin
Clips
open to ½" for connection to wires, lugs, etc.
Option "401"
Single Pointed Handheld Probe Set
- ideal for probing into
recessed squib wire sockets, and onto larger metal surfaces (flat or round)
such as flares, rounds and shells, that do not easily accept test lead clip
attachment.
Option "403"
4 Terminal Kelvin Mini-probes
-
(photo shown above)
Each
probe has two
spring loaded, gold plated,
steel tips
with 0.18" separation.
(one red and one black handheld probe). Excellent general purpose Mini-
Probe, and along with the Option "300" Kelvin Clip Leads easily fit inside
the AMPTEC 620ES Test Lead Pouch (OP110).
Option “620-ISO”
Isolated Analog Output
provides an isolated DC
Voltage output directly proportional to the measured resistance (
1.2345 VDC =1.2345 ohms). A datalogger or system DVM can safely
measure the isolated voltage as being representative of the actual resistance
of the device under test.
Option "247"
for continuous operation 24Hr/7day. Dual stage isolation
provides safe power for 620 series Igniter Tester
to safely run continuous 24
Hrs/day
without batteries.
It’s proven “Medical Safety 3 KV Isolation”
technology is used in monitoring human patients wired to electrical
instrumentation. This field tested option is presently running in over 50
AMPTEC 620 series igniter testers in U.S. Anti-Ballistic Missile systems
(24Hrs/7).
Kelvin Leads, Probes Accessories and Options
Option “290” Alligator Test Lead Set
Option "300"
Kelvin Clip Test Leads
FED
SWIFT
delivery program
EX
Option "403"
Kelvin Mini-probe
Test Lead Set
Option "302" Banana Jack
Backed Kelvin Clips
AMPTEC 620A series Test Leads, Probes and Accessories
See
Option "247" Continuous Isolated
Operating Power capability
description on
the bottom left column
.
Recommended for
customers that plan to automate the
AMPTEC 620 series Explosive Safety
Igniter Tester using the RS232C interface.
Option "100"
is a hardshell (impact resistant plastic) shock
absorbing foam lined meter and accessory carrying case for the
620A series Ohmmeter with extra room for test leads, battery
charger, Kelvin Clip Test Leads, Connector Adapters, single
pointed probes and operator manual etc.
Option "519S and D" Rack Mount Adapter
Option "519S or D" - "S” for a single unit, “D” for dual/side by
side two unit install. The AMPTEC 620VN Igniter Tester (this
option comes with a flush panel mount faceplate cutout and
support tray) can be installed/secured into a standard 19" NEMA
equipment rack support tray (provided). The meters feet screws
(~ 3” long #6-32 machine screws) are routed through the
support tray holes back through the meter’s (bottom) feet holes
into its lid.
page 6
