Ampt 31570013, Installation Manual

Page: 21 / 22

Appendix
Copyright 2014 AMPT, LLC.
21
Appendix
Compliance
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment complies with radiation exposure limits set forth for uncontrolled
environment. The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons.
IMPORTANT! Changes or modifications not expressly approved by Ampt, LLC could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
FCC ID # X3R-31570013
Model Number: 31570013