Amprobe ALC-110, User Manual, Page: 6 / 62

2
SYMBOLS

Caution

WARNING. HAZARDOUS VOLTAGE
Risk of electric shock
Consult user documentation
�
Application around and removal from
uninsulated hazardous live conductors is
permitted
CAT III
Measurement Category III is applicable to
test and measuring circuits connected to
the distribution part of the building’s
low-voltage MAINS installation
B
Alternating current

> 30 A/m
Do not operate within external low
frequency magnetic fields >30 A/m

Equipment protected throughout by
DOUBLE INSULATION or REINFORCED
INSULATION
Battery
 Conforms to European Union directives
Certified by CSA Group to North American
safety standards
Conforms to relevant Australian EMC
standards

This product complies with the WEEE
Directive marking requirements. The
affixed label indicates that you must not
discard this electrical/electronic product
in domestic household waste. Product
Category: With reference to the equipment
types in the WEEE Directive Annex I,
this product is classed as category 9
“Monitoring and Control Instrumentation”
product. Do not dispose of this product as
unsorted municipal waste.
SAFETY INFORMATION
The meter complies with:
• IEC/EN 61010-1 3rd Ed., UL61010-1 3rd Ed. and CAN/
CSA C22.2 No. 61010-1-12 to CAT III 600 V, pollution
degree 2.
• IEC/EN 61010-2-032
• IEC/EN 61557-13
• EMC IEC/EN 61326-1 and IEC/EN 61326-2-2
Measurement Category III (CAT III) is for measurements
performed in a building installation. Examples include
measurements on distribution boards, circuit breakers
and wiring — including cables, bus-bars, junction boxes,
switches, socket-outlets in a fixed installation — as well as
equipment for industrial use and stationary motors with a
permanent connection to the fixed installation.