Ampro MightyBoard 800, Quick Start Manual

Page: 19 / 26

Chapter 2 Installing MightyBoard 800 Options
MightyBoard 800 QuickStart Guide 15
10. Apply firm and even pressure as you push down on the DIMM, fully inserting it into the slot.
CAUTION
To prevent damage to the DIMM or the slot, do not rock the DIMM into
place, but apply firm and even pressure downward.
11. If the retaining latches do not close completely on the DIMM, remove it and repeat Steps 7 to 10.
12. Reconnect any cables you disconnected earlier and verify all other connections to the
MightyBoard 800 are still connected.
13. Reconnect the ATX power supply’s power cord to the power source.
14. Restore power to the MightyBoard 800 and observe the boot screen for new memory recognition.
If the system does not boot or there is a problem recognizing the new memory, the new DDR
DIMM could be defective or the DDR DIMM was not properly installed to be recognized.