Preparing the Equipment
23
Operating the vibration pad
In order to use the vibration pad, it must initially be fully charged:
1. Connect the alarm clock to the mains power supply via the
power adapter plug.
2. Remove the small rubber cap from the sliding switch on the
vibration pad.
3. Plug one end of the connection cable in the socket in the
vibration pad and in the other end in the socket for the
vibration pad in the alarm clock.
4. The LED on the vibration pad lights up red.
5. When the vibration pad is fully charged, disconnect the
connection cable from the alarm clock.
6. Use the sliding switch on the vibration pad to switch it on.
7. Set the alarm mode on the alarm clock to vibration" or
acoustic alarm + vibration".
On reaching the set time, the vibration pad vibrates
intermittently until the alarm function is interrupted by
pressing the Snooze button (1).
Using the telephone signal
You can also use the TCL 190 alarm clock to signal incoming
telephone calls. Connect the TCL 190 alarm clock to the
telephone connection socket as illustrated in the connection
diagram.
Each incoming call is then diverted to the alarm clock and the
acoustic signal is triggered by each call regardless of the alarm
time set.
0844 800 6503 (Using an UK landline, at the time of going to print: calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary.)
Summary of Contents for TCL 190
Page 14: ...Notes 29 Notes...
