background image

In Case of Problems

26

5

In Case of Problems

Service−Hotline

Should problems arise with the device, please refer to the
following information first. In the event of technical problems,
please contact out service hotline under tel. 0844 800 6503
(Using an UK landline, at the time of going to print: calls cost 6p
for connection charge and then 5p a minute. Mobile costs may
vary). In the case of claims under the terms of guarantee, contact
your sales outlet. There is a 2 year period of guarantee.

Problems and solutions

Problems

Solutions

Equipment does not
work

− The battery charge is too low or no

batteries are inserted.

− The power adapter plug is not

plugged in.

Vibration pad does
not work

− The battery charge is too low or the

battery is defective.

− Battery packs are available from

Amplicomms.

− The vibration pad is not switched on.
− It is outside the range of the alarm

clock.

Alarm signal is not 
triggered

− The alarm function is not switched

on; turn the knob to On".

0844 800 6503 (Using an UK landline, at the time of going to print: calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary.)

Summary of Contents for TCL 190
















Reviews: